SV07

Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits: SV06 PlusSV07SV07 Plus Note: Does not include any installation hardware.

Hotend Heater Cartridge Heats the hotend Includes: Heater (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Hotend Assembly for SV06 Plus, SV07/Plus Includes: Heat break (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermistor (1 pcs)Silicon sock (1 pcs)M2.5x10 socket head cap screws (2 pcs)0.40mm nozzle (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Hotend Fan Set Includes: Print cooling fan (1 pcs)Heatsink fan (1 pcs) Fits: SV06SV07SV07 Plus

LED Light (PCB Board) for Extruder Aluminates the part being printed.  Includes: Led light board(1 pcs) Fits: SV07SV07 Plus

Mainboard (Motherboard) for Sovol SV07 This silent mainboard comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV07

Nylon Mounting Pins for Extruder LED Light Nylon fasteners for mounting the LED light board to the extruder cover. Includes: Nylon pins (3 pcs) Fits: SV07SV07 Plus

Brass High Flow Nozzle Includes: Nozzle (1 pcs) Size: 0.40mm  For: 1.75mm diameter filament Fits: SV06 PlusSV07SV07 Plus

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Hardened Steel High Flow Nozzle Set Made of hardened steel for printing abrasive filaments.  Includes: 0.40mm Nozzle (2 pcs)0.60mm Nozzle (2 pcs)0.80mm Nozzle (1 pcs)1.00mm Nozzle (1 pcs) Sizes: 0.40mm  0.60mm  0...

Roller Wheel (X/Y Carriage Roller Wheel) Includes: Wheel with Bearings (1 pcs) Fits: SV07SV07 Plus

M3x3 Set Screw Includes: Set screw (5 pcs) 12.9 GradeCup point

Silicone Sock Includes: Silicone sock (1 pcs) Fits: SV06 PlusSV07SV07 Plus

L Shaped Socket Wrench Size: 6 mm Includes: Wrench (1 pcs)

Stepper Motor Includes: Motor (1 pcs) Fitment Locations:X or Y axis on the SV06, SV07X or Z axis on the SV07 PlusX axis on the SV06 Plus Fits: SV06 (X/Y axis)SV06 Plus (X axis) SV07 (X/Y axis)SV07 Plus (X/Z axis) 

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Hotend Thermistor Includes: Thermistor (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Bed Leveling Thumb Nut  Also called a bed leveling wheel or thumb wheel. These are used for leveling the print bed on Sovol and many other 3D printer brands Includes: Bed leveling nut (1...