XL

E3D Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL and MK4 Includes: Adapter (1 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa...

Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL, MK3.9, MK4 and CORE One Includes: Adapter (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL Note: Nozzle not...

Nozzle Cleaning Needle 0.3mm Diameter Includes: needle (5 pcs)  

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

PB Select™ Nylon Washer 3x7x1mm Replacement for the washers on the Core XY subassembly. Includes: Washer (50 pcs) Size: 3x7x1mm Fits: Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to...

NYLON 3x555 mm Includes: NYLON 3x555 mm (1 pc) Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...

O-Ring Set Includes: O-ring (100 pcs) Fits: XL

Parking Plate and Nozzle Seal Set for Prusa XL Includes:Parking plate (5 pcs)Nozzle seal (5 pcs) Fits: Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...

PE Faston 6.3x0.8 Includes: PE Faston Connector (1 pcs) Fits: Prusa MK3.9Prusa MK3.9SPrusa Mk4Prusa MK4SPrusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

Planetary Gear Assembly & Planetary Gear Ring (PG Assembly + PG Ring) Includes:PG ring (1 pc)PG assembly (1 pc)  CAUTION:  Please replace both parts in your Nextruder, as it may not work properly if you replace one part...

Prusa Print Cooling Fan This is the blower fan that cools the part being printed. Includes: Fan (1 pcs) Fits: Prusa MK3.9Prusa MK4Prusa XL  To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Includes: Brush (1 pcs) Made in EU with locally sourced beech wood.

Prusa PSU - 24 Volts This is the replacement power supply unit ONLY. It does NOT come with any cables. Buy the MK3 PSU kit here.  Includes: Power supply unit (1 pcs) Specifications:Voltage: 24VDCWattage: 240WCurrent (MAX): 10AFuse:...

Prusa MK3 Power Supply Assembly Replacement Power supply unit 24V 240W (assembly). It is ONLY compatible with MK3/S/+. The PSU itself is also available separately, without any cables or fasteners. Includes:Power supply unit 24V...

PTFE Tube 2.5MM ID Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2.5mm (±0.25mm) Outside Diameter: 4mm (±0.25mm) Color: White Max Working Temp:...

Prusa XL Rubber Foot Includes: Rubber foot (1 pcs) Fits: XL

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL