P1 Series

  FlowTech™ - CHT High Flow Nozzles Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow...

  FlowTech™ - CM2 CHT High Flow Nozzles Microswiss and Bondtech have partnered to bring the High Flow, Hardened tip CM2™ nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically...

Microswiss CM2™ Wear Resistant Nozzle for FlowTech™ Hotend The Microswiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an...

Complete Hotend Assembly for P1 Series Includes: Hotend (1 pcs)Heater (1 pcs)Thermistor (1 pcs)Retaining clip (1 pcs)Thermal grease (1 sachet)Silicone sock (1 pcs)M3*14 screws (2 pcs) Max Printing Temp: 320 ℃ Fits: Bambu...

Hotend Cooling Fan for P1 Series The Cooling Fan for Hotend is used to cool and reduce the temperature of the ceramic heater. The cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The...

  Bambu Lab Display Connector Cable for P1 Series Printers The display connector cable for P1P is used to connect the motherboard and high-resolution screen. Its function is to transmit SD card data and display images between the screen and...

E3D DiamondBack Complete HotEnd for Bambu Lab P1P & P1S Available in 0.40, 0.60 or 0.80mm. These premium HotEnds are an official collaboration between E3D, DiamondBack, and Bambu Lab - bringing you the most extreme HotEnd solution to date. E3D is...

High Flow ObXidian™ Hotend for Bambu Lab X1/P1 Series E3D & Bambu Lab ObXidian High Flow Hotends are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant...

Fully Assembled High Flow ObXidian™ Hotend for Bambu Lab P1 Series E3D & Bambu Lab ObXidian High Flow Hotends are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly,...

Extruder Filament Sensor for P1 Series This sensor is used in the Extruder to detect the presence of the filament, and also detect the Filament Cutter lever. Includes:Extruder Filament Sensor (1 pcs)Screw BT2*5 (2 pcs)Glue (1 pcs) Fits: Bambu...

Extruder Interface Board for P1 Series The Extruder Interface Board is an auxiliary board of the TH board, and it is used to expand the interface of functional components, such as the hotend and extruder unit. Includes: Extruder Interface Board...

Extruder Motor The extruder motor is installed on the toolhead and used to drive the movement of the extruder. It is a 36-series circular stepping motor. Includes: Extruder Motor (1 pcs)Glue (1 pcs) Fits: Bambu Lab P1 SeriesBambu lab X1...

  Bambu Lab Filament Buffer for X1 and P1 Series Printers The Filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with...

Filament Cutter - 3 Pack Replacement filament cutter. The filament can be cut to prevent the system from clogging. When used with AMS, it assists with multi-material switching. Includes: Filament Cutter (3 pcs) Fits: Bambu...

Bambu Lab Filament Cutter Lever for the X1 Series and P1 Series Printers The filament cutter lever is used for holding the cutter and pushing it to cut filaments. Includes: Filament Cutter Lever (1 pcs)Screw (1 pcs)Shaft...

  DiamondBack FlowTech™ Nozzles The collaboration between Microswiss and DiamondBack introduces the most advanced nozzle to the FlowTech ecosystem. This nozzle features a proprietary Polycrystalline Diamond (PCD) insert, developed after 40...

FlowTech™ Heatsink for Bambu Lab X1 and P1 This is a Microswiss FlowTech™ Heatsink for Bambu Lab X1 and P1 Printers. It is compatible only with Microswiss FlowTech hotend models M3109X and M3109P. Includes:Aluminum Heatsink (1...

FlowTech™ Hotend for Bambu Lab P1 This hotend kit comes with a 0.40mm nozzle, plug-and-play heater core/thermistor and is fully compatible with the Bambu Lab P1P/P1S 3D Printers. Stock z-height, build volume and firmware remains unchanged...

Silicone Socks for Bambu Lab printers A pack of 3 high temperature non-stick silicone socks for FlowTech™ hotend model: M3109. Includes: Silicone sock (3 pcs) Color: Black Fits:Bambu Lab X1 (with Flowtech Hotend)Bambu...

Front Housing Assembly with Fan for Bambu Lab P1 Series Printers The Front Housing Assembly is mainly used to cool the printed part. Includes: Front housing assembly (1 pcs)Print cooling fan (1 pcs) Fits: Bambu Lab P1 Series Learn...