P1 Series

Hardened Steel Extruder Gear Assembly The hardened steel extruder gear assembly is an internal component of the hardened steel extruder unit. It comprises a driven gear and an active gear that work together to feed filament into the hotend. Built...

Heatbed Piezo Interface Board for Bambu Lab X1 and P1 Series Printers  A small circuit board installed underneath the heatbed, which connects the heatbed sensors to the MC board. Includes: Heatbed piezo interface board (1 pcs)ST2-3...

Heatbed Sensor Interface Board for Bambu Lab X1 and P1 Series Printers This interface board is installed in the rear part of the heatbed with 5 connectors. Includes: Heatbed sensor board (1 pcs)Glue (1 pcs) Fits: Bambu...

Bambu Lab Heatbed Sensor Unit for X1 and P1 Series Printers  The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors...

  Bambu Lab Heatbed Signal Cable for X1 and P1 Series Printers The heatbed signal cable is a 6pin cable connected to the hotbed sensor for temperature measurement and leveling. Includes: Cable (1 pcs)Glue (1 pcs) Fits:Bambu Lab P1...

Bambu Lab Build Plate Magnet with Cutout for the P1P Printer The heatbed surface magnet is an adhesive backed soft rubber magnet adhered to the heatbed aluminum base plate. Its primary purpose is to ensure a strong magnetic connection with the...

Bambu Lab Heatbed Unit V3 for P1 Series Printers The heatbed in the P1 series printer is a platform installed inside the printer chamber. It can move up and down along the Z-axis and can be heated based on the temperature set by the user. Setting an...

XY Pulley for Bambu Lab X1 Series and P1 Series Printers The XY tensioner idler is an idler mounted on the XY belt tensioner, one on each side (XY), each containing two washers, and an idler. Includes: Idler pulley (1 pcs)Graphite nylon...

Bambu Lab LCD Screen for P1 Series Printers The screen module with LCD screen and physical control buttons can be used to display printing parameters and control the printer. Includes: Screen (1 pcs) Fits: Bambu Lab P1 Series Learn...

Bambu Lab LED Light - P1 Series The chamber LED is an LED light bar installed on the left beam of the chamber and used to supplement the light of the chamber. The chamber LED light bar comes with a connecting cable. Includes:  LED...

  Liquid Glue for Build Plate (Print Bed Adhesive) Includes: 60mL print bed glue (1 bottle) Works with: ABS, PLA, PETG, ASA, PET, TPU Material Safety Data Sheets Instructions Apply pressure to the applicator head to open...

Bambu Lab Lubricant Grease Lubricant Grease is used to lubricate lead screws, or to eliminate noise issues between belts and idle pulleys.  Includes: - Lubricant Grease (6 pcs) Learn more about the Lubricant Grease...

Bambu Lab Lubricant Oil Lubricant Oil is typically used for the lubrication of linear guides, slide rails, and steel shafts. Theoretically, Lubricant Oil can also be used for lead screw lubrication, but since Lubricant Oil is prone to...

  Bambu Lab MC to AP Board Cable for P1 Series Printers Cable that connects the MC board to the AP board on the P1 series printers. It supplies power and data. Includes: Cable (1 pcs) Fits: Bambu Lab P1...

Bambu Lab Motor Drive Pulley for X1 and P1 Series Printers The motor drive pulley is installed on a motor to drive the belt. Includes: Drive pulley (1 pcs) Fits: Bambu Lab P1 SeriesBambu Lab X1 Series Instillation: Learn...

Nozzle Wiper - 3 Pack The Nozzle Wiper is used to clean up the waste overflowing from the nozzle of the printer. It consists of PP elastic structure, PTFE tube, and a lock screw. Includes: Nozzle wiper (3 pcs)Mounting screw (3...

  Bambu Lab 4-in-1 Printer Cable Pack  The pack comes with 4 cables including the communication cable connecting the AC board and MC cable, the MC board power supply cable, the heat bed power cable for V3 heatbed, and the cable...

Bambu Lab PTFE Tube (Translucent Gray) Includes: 4 meter PTFE tube (1 pcs) We recommend this cutter to cut the PTFE tube. The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its...

Bambu Lab PTFE Tube Coupler for X1 Series and P1 Series Printers The PTFE Tube Coupler is a component used to connect the PTFE tube, which is mounted on the back of the printer and used to connect the PTFE tube between the buffer and the tool...

Bambu Lab Purge Chute for X1 and P1 Series Printers An assembly that installed on the back of the printer and it is used to clean the nozzle and slide the excess filament out of the printer. Includes: Purge Chute (1...