Flashforge

Flashforge Build Chamber Camera Includes: Camera (1 pcs) Fits: Adventurer 4 Note: Mounting screws not included. Compatible screws available here.

Flashforge Build Chamber Camera Includes: Camera (1 pcs)Mounting screw (1 pcs) Fits: Adventurer 5M ProRobo E4

  Chamber Camera Includes: Camera (1 pcs) Fits: Guider 2S HTRobo E3 Pro Note: mounting screws not included.

 Refurbished Item  This part was removed from a brand new Inventor 2S printer. It may show signs of being installed, but it is a new item.  Flashforge Build Chamber Camera Includes: Camera (1 pcs) Fits: Inventor 2S

Guider 2 Camera Bracket STL File  Printable camera bracket for Guider 2S/HT or for adding a camera to the Guider 2. Designed by NSC. Click here to download the STL file. Licensed under a Creative Commons Attribution-ShareAlike 4.0...

  Camera Connection Cable Includes: Cable (1 pcs) Fits:Adventurer 3Monoprice VoxelRobo E3

  Camera Connection Cable Includes: Cable (1 pcs) Fits:Adventurer 4

  Camera Connection Cable Includes: Cable (1 pcs) Fits:Guider 2S HTRobo E3 Pro

Flashforge Ceramic Eye - Filament Guide Includes: Eyelet (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)DreamerGuider 2Guider 2SGuider 2S HTInventorMonoprice VoxelRobo E3

  Chamber Fan (120x120x25mm) This is the chamber fan that is located behind the HEPA filters. Includes: Fan (1 pcs) Fits: Creator 4Guider 3 PlusGuider 3 Ultra

  Flashforge Chamber Fan Includes: Chamber Fan (1 pcs)Volts: 24Size: 80x80x25mm Fits: Guider 2S HTRobo E3 Pro

   Used Item  Removed from low hour 3D printers.  Flashforge Chamber Thermistor Dreamer/NX replacement chamber thermistor Includes: Thermistor (1 pcs) Fits:DreamerDreamer NX

  Hotend Mounting Block (Cold Block) Includes: Cold block (1 pcs) Fits:Creator ProCreator MaxDreamerInventor Important fitment note: Early printer models used a block with holes drilled on top of the block (see picture below). If your current...

  Please read our returns policy regarding electronic items Finder 3 Control Board (Mainboard) This is the control board that is located behind the touch screen.  Includes: Control board (1 pcs) Fits: Finder 3 Note: This is not...

  Door for Build Plate Ribbon Cable Access This is the small plastic door that goes on the bottom of the build plate where the ribbon cable is located.   Includes: Door (1pcs) Fits: Adventurer 4

  Flashforge Door Detection Board Senses when door is closed Includes: Detection board (1 pcs) Fits:Creator 3Inventor 2

  Door Sensor Switch Includes: Door sensor (1 pcs) Fits: Creator 4

  Flashforge Y Axis Pulley Assembly (Drive Shaft) Includes:Y axis drive shaft (1 pcs)Pulley (3 pcs)Flange bearing (4 pcs)Spacer (1 pcs)E-Clips (2 pcs) Fits:Inventor 2Inventor 2SFinderFinder 2

  Flashforge Driven Shaft Includes: Shaft (1 pcs) Size: 5x455mm Location: Driven Y Axis Fits: Creator ProCreator Pro 2Creator Max 2

  Please read our returns policy regarding electronic items  Used Item  Board has 41 hours on it.  Driver Board for Dreamer NX This is for the older style Dreamer NX that uses both a core board and a driver board. Check your...

  Please read our returns policy regarding electronic items Flashforge Driver Board Includes: Driver Board (1 pcs) Fits:Finder 3Artemis

  Please read our returns policy regarding electronic items Flashforge Driver Board Includes: Driver Board (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro 

  Please read our returns policy regarding electronic items  Driver Board for Original Dreamer This is for the older style Dreamer that uses both a core board and a driver board. Check your current board before ordering and make sure it...

  Flashforge E-Clips For holding timing pulley to 5mm motor and axle shafts Includes: E-Clip (5pcs)

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Flashforge 4020 Fan Cools the electronics in the bottom of the printer.  Includes: Fan (1 pcs) Size: 40x40x20mm Fits:Creator Pro 2Creator Max 2

  EMI Filter Includes: EMI Filter (1 pc) Fits:Guider 3 PlusGuider 3 Ultra

  Adventurer 5M Enclosure Kit (Does Not Include Printed Parts) The AD5M Enclosure Kit contains all non-3D printed parts needed to enclose your Adventurer 5M.  IMPORTANT Before ordering please visit the following links to download the...

  4020 Air Filter Fan This fan is used for the outside air filter. Includes: Fan (1 pcs) Size: 40x40x20mm Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Flashforge Extruder PCB Adapter Board - Left Side Includes:  Adapter Board (1 pcs) Location: Left extruder Fits: Creator 3

  Flashforge Extruder PCB Adapter Board - Right Side Includes:  Adapter Board (1 pcs) Location: Right extruder Fits: Creator 3

  Flashforge Extruder Adapter PCB Board Includes: Extruder adapter board (1 pcs)   Fits:Guider 2Guider 2SRobo E3 Pro

  Flashforge Extruder Adapter Board Includes: Adapter board (1 pcs) Fits: Creator 4

  Extruder Assembly Includes: Extruder (1 pcs)0.40mm nozzle (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Filament Feeder (Extruder) Assembly Fully assembled Includes:Filament runout sensor (1pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly (1 pcs)  Fits: Adventurer 4 Pro

  Filament Feeder (Extruder) Assembly Fully assembled Includes:Filament runout sensor (1pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly (1 pcs)  Fits: Adventurer 4

  Flashforge Filament Feeder (Extruder) Assembly Comes fully assembled and ready to install. Includes:Filament runout sensor (1 pcs)Cable for runout sensor (1 pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder...

  Flashforge Filament Feeder (Extruder) Assembly Comes fully assembled and ready to install. Includes:Filament runout sensor (1 pcs)Cable for runout sensor (1 pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly  Fits:...

  Flashforge Left Extruder Assembly  Includes: Extruder with hotend assembly (1 pcs) Location: Left Side  Fits: Creator 3 Pro

  Flashforge Extruder Assembly (LH) Complete, fully assembled LEFT SIDE extruder assembly. Includes:Stepper motor (1 pcs)Heatsink (1 pcs)Fan - Heatsink (1 pcs)Fan - Print cooling (1 pcs)Fan cover (1 pcs)Extruder PCB board (1 pcs)Heat...

  Flashforge Left Extruder Assembly  Includes: Extruder with hotend assembly (1 pcs) Location: Left Side  Fits: Guider 3 Ultra

  Flashforge Right Side Extruder Assembly  Includes: Extruder with hotend assembly (1 pcs) Location: Right Side  Fits: Creator 3 Pro

  Flashforge Extruder Assembly (RH) Complete, fully assembled RIGHT SIDE extruder assembly. Includes: Stepper motor (1 pcs)Heatsink (1 pcs)Fan - Heatsink (1 pcs)Fan - Print cooling (1 pcs)Fan cover (1 pcs)Extruder PCB board (1 pcs)Heat break...

  Flashforge Left Extruder Assembly  Includes: Extruder with hotend assembly (1 pcs) Location: Right Side  Fits: Guider 3 Ultra

   Refurbished Item Removed from low hour 3D printers, may show signs of use. Flashforge Extruder Assembly  Includes: Extruder/Hotend Assembly (1 pcs) Fits: Dreamer NX Note: Extension wires that run from the...

   Used Item  Removed from moderate hour 3D printers and Refurbished.  Flashforge Dual Extruder Assembly  Includes: Extruder/hotend assembly (1 pcs) Fits:DreamerInventor Note: Wiring harness is not...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Finder 2 (24v) Extruder Assembly Complete assembly including hotend. Includes: Extruder/hotend assembly...

  Flashforge Extruder Assembly  Includes: Extruder assembly with 0.40mm nozzle (1 pcs) Fits: Guider 3 Plus Does not fit standard Guider 3

  Flashforge Extruder Assembly  Includes: Extruder assembly with 0.40mm nozzle (1 pcs) Fits:Guider 3Robo E4 Pro Does not fit Guider 3 Plus

    Flashforge Inventor 2/S Extruder Assembly This extruder includes the belt (belt not shown in pictures). Includes:Extruder/hotend assembly (1 pcs)Timing belt - installed (1 pcs) Fits:Inventor 2Inventor 2S

  Flashforge Extruder Board (Extruder Transfer Board) This is the top PCB board that the flat cable plugs into. It is also the X axis sensor. Includes: Transfer board/limit switch (1 pcs) Fits: Adventurer 4 Scroll down for instruction video

  Flashforge Extruder PCB Board Includes: Extruder board (1 pcs) Fits:DreamerInventor

  Flashforge Extruder Cable Runs from mainboard to extruder. Includes: Extruder cable (1 pcs) Fits: Guider 3 Plus

  Flashforge Extruder Cables This is the flat cable that runs form the mainboard to the extruder PCB board. Includes: Extruder flat cable (1 pcs) Fits: Guider 3, Robo E4 Pro

   Used Item  Removed from low hour 3D printer Flashforge Extruder Carriage (Bracket) Includes: Carriage bracket (1 pcs) Fits:Creator ProCreator MaxDreamerInventor

   Used Item   This item is fully functional, but may show signs of use, such as scuffs and scratches. Flashforge Extruder Carriage (Bracket) Includes: Carriage bracket (1 pcs) Fits: Dreamer NX

  Left Extruder Cover Includes: Left cover (1 pcs) Fits: Creator 3

  Right Extruder Cover Includes: Right cover (1 pcs) Fits: Creator 3

  Extruder Cover Includes: Cover (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 Pro Note: Mounting hardware not included.

  Flashforge Extruder Cable Runs from the mainboard to the extruder. Includes: Flat Cable (1 pcs) Fits:Creator 3Creator 3 ProGuider 2Guider 2S HTRobo E3 Pro

  Flashforge Extruder Cable Runs from the mainboard to the extruder assembly. Includes: Flat cable (1 pcs) Fits:FinderFinder 2Inventor 2

   Used Item  Cables are removed from low hour 3D printers. Flashforge Extruder Cable Runs from the mainboard to the extruder assembly. Includes: Flat cable (1 pcs) Fits:FinderFinder 2Inventor 2

  Extruder Front Cover and Print Cooling Fan Includes: Front cover (1 pcs)Fan (1 pcs)Magnets - Installed (2 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Flashforge Extruder Lever Assembly - Left Side  Includes:Filament leverBacking plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1...

   Used Item  Removed from low hour 3D printers Flashforge Extruder Lever Assembly - Left Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1...

  Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1 pcs)6mm...

  Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1 pcs)6mm...

  Flashforge Main Cable (LEFT) This cable is about 6 feet long and runs from mainboard to the extruder transfer board. Includes: Cable (1 pcs) Fits: Creator 4

  Flashforge Main Cable (RIGHT) This cable is about 6 feet long and runs from mainboard to the extruder transfer board. Includes: Cable (1 pcs) Fits: Creator 4

  Extruder Mechanism - Filament Feeder This part contains the gears that drive the filament. It is also called a filament feeder or drive gear box.  Includes: Extruder Mechanism (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4 Note:...

  Flashforge Extruder PCB Board - Left Side For left side extruder only Includes: PCB Board (1 pcs) Fits: Creator 3 Pro

  Flashforge Extruder PCB Board - Left Side Includes: PCB Board (1 pcs) Fits: Creator 4 Note: For left side extruder only

  Flashforge Extruder PCB Board - Right Side For right side extruder only Includes: PCB Board (1 pcs) Fits: Creator 3 Pro

  Flashforge Extruder PCB Board - Right Side Includes: PCB Board (1 pcs) Fits: Creator 4 Note: For right side extruder only

  Flashforge Extruder PCB Board  Includes: Adapter board (1 pcs) Fits: Guider 3 Plus

  Flashforge Extruder PCB Board  Includes: Adapter board (1 pcs) Fits: Guider 3Robo E4 Pro

  Flashforge Extruder PCB Board Includes: PCB Board (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: For Left Side extruder only Right side extruder PCB board available here

  Flashforge Extruder PCB Board Includes: PCB Board (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: For right side extruder only Left side extruder PCB board available here

  Flashforge Extruder Board (Extruder Transfer Board) This is the top PCB board that the flat cable plugs into. It is also the X axis sensor. Includes: Transfer board/limit switch (1 pcs) Fits: Adventurer 3 Pro 2Adventurer 4 Pro

  Extruder Adapter (PCB Board) Includes: PCB Board (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4  

  Extruder Cover and Housing Includes:Housing (1 pcs)Top cover (1 pcs)Ceramic eyelets (2 pcs) Fits:InventorDreamerCreator Max Note: Mounting hardware not included

  Flashforge Extruder Spring Includes: Spring (1 pcs) Length: 21.5mm Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Creator 3 ProInventorInventor 2FinderFinder 2 Creator ProCreator Pro 2Creator MaxCreator Max...

  Extruder Cover - LEFT SIDE Top cover for the right extruder. Holds the wire harness in place. Includes: Plastic cover (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Mounting hardware not included

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Extruder Cover Includes: Top cover (1 pcs) Fits: Creator Pro Mounting hardware not included

  Extruder Cover - RIGHT SIDE Top cover for the right extruder. Holds the wire harness in place. Includes: Plastic cover (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Mounting hardware not included

  Flashforge Finder 3 Extruder PCB Board Includes: PCB Board (1 pcs) Fits: Finder 3Artemis

  Flashforge Extruder PCB Board (Extruder Transfer Board) This is the top PCB board that the flat cable plugs into and is also the X axis limit switch. Fits: Adventurer 3Adventurer 3 Pro (not pro 2)Monoprice VoxelRobo E3

  Flashforge Extruder Wire Harness Runs from extruder to adapter board. Includes: Wire harness (2 pcs)Bracket (2 pcs) Fits: Creator 4

  Flashforge 4010 Fan Includes: Fan (1 pcs) Voltage: 24VDC Size: 40x40x10mm Fits: Creator Pro 2Creator Max 2

  Flashforge 8015 Fan Includes: Fan (1 pcs) Size: 80x80x15mm Fits: Creator 3

  Flashforge 30x10mm Cooling Fan Includes: Fan (1 pcs) Locations:Guider 3/3 Plus: Upper extruder coolingFinder 3: Heatsink coolingRobo E4 Pro: Upper extruder cooling Fits:Finder 3 Guider 3Guider 3 PlusRobo E4 Pro 

  Flashforge 40x10mm Extruder Cooling Fan This fan cools the lower part of the extruder. Includes: Fan (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro Note: This is not the print cooling fan

  Flashforge Blower Fan This is the fan that cools the part being printed Includes: Fan (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Blower Fan This is the fan that cools the part being printed Includes: Fan (1 pcs) Fits:Creator...

Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4InventorInventor...

 Used Item  Removed from low hour 3D printer. Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer...

  Flashforge Blower (Turbo) Fan Blows air on the part being printed. Includes: Fan (1 pcs) Voltage: 24 VDC Fits: Creator 3

  Flashforge Blower (Turbo) Fan This is the fan that cools the part being printed.  Includes: Fan (1 pcs) Fits:Inventor 2Inventor 2SFinderFinder 2

  Flashforge 3010 Fan Includes: Fan (1 pcs)Voltage: 24 VDCSize: 30x30x10mm Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4Adventurer 4 ProGuider 2Guider 2S HTCreator 3 ProRobo E3Monoprice Voxel

  Flashforge 4010 Fan Includes: Fan (1 pcs)Volts: 24Size: 40x40x10mm Fits:DreamerDreamer NXInventor