Flashforge

  Flashforge Replacement Power Supply Includes: Power supply unit (1 pcs)  Fits:Creator ProCreator Pro 2Creator Max Creator Max 2DreamerDreamer NXInventor

  Power Supply Unit (PSU) Includes: PSU (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Flashforge X Carriage (Print Head Mounting Bracket) This is the bracket the print head mounts on and slides back and forth on the X carriage.  Includes: Bracket (1 pcs) Fits: Adventurer 3 Pro 2Adventurer 4Adventurer 4 Pro

  Flashforge Bed Tape (Print Surface)  Adhesive backed for easy application Includes: Print surface (3 pcs) Fits: Adventurer 3Monoprice VoxelRobo E3

Flashforge Print Surface Adhesive backed for easy application Includes: Print Surface (1 pcs) Fits: Adventurer 4

  Flashforge Print Surface Bed Tape Adhesive backed for easy application Includes: Print surface (1 pcs) Size: 153x232mm (can be cut to fit other printers) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Inventor (for Inventor 2 bed tape...

  Flashforge Print Surface (Bed Tape) Adhesive backed for easy application Includes: Print Surface (1 pcs) Size: 263x307mm (can be trimmed to fit other printers) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Print Surface (Bed Tape) Adhesive backed for easy installation Includes: Print surface sheet (1 pcs) Fits: Guider 3 Plus

  Flashforge Print Surface (Bed Tape) Adhesive backed for easy installation Includes: Print surface sheet (1 pcs) Fits: Guider 3Robo E4 Pro 

  Flashforge Bed Surface Tape Adhesive backed for easy application Includes: Print surface (1 pcs) Size: 157x167mm  (can be trimmed to fit smaller beds) Fits:Inventor 2Inventor 2

  Flashforge Print Surface (Bed Tape) Adhesive backed for easy installation Includes: Print surface sheet (1 pcs) Size: 273x327mm (can be trimmed to fit other printers) Fits: Creator 3Creator 3 Pro

  PTC Chamber Heater Includes: Heater (1 pcs) Fits: Creator 4

  PTFE Connector Includes: Connector (1 pcs) Fits: Creator 3

  Flashforge PTFE Tube Runs from the filament feeder (extruder) to the print head. Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Monoprice VoxelRobo E3 Note: Does not include snap ring Watch the videos below for helpful information on...

  Flashforge PTFE Tube Runs from the extruder (filament feeder) to hotend (print head) Includes: PTFE tube (1 pcs)  Fits: Adventurer 4

  Flashforge Hotend PTFE Tube This is the short PTFE tube that fits into the upper portion of the heat break. Includes: PTFE tube (1 pcs) Fits: Creator 3 Pro

  Flashforge PTFE Tube for Nozzle This is the PTFE tube that fits into the Creator 3 nozzle. Includes: PTFE tube (2 pcs)  Fits: Creator 3 Nozzles

  Flashforge PTFE Tube for Nozzle This is the PTFE tube that goes inside the nozzle. Includes: PTFE tube (1 pcs) Fits:Creator Pro 2Creator Max 2

  Flashforge Extruder/Nozzle PTFE Tube This is the PTFE tube that fits inside the nozzle/heat break. Includes: PTFE tube (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

  Flashforge PTFE Tube for Hotend/Nozzle This is the PTFE tube that fits inside the nozzle & heat break Includes: PTFE tube (1 pcs) Fits:FinderFinder 2Inventor 2

  Flashforge Extruder/Nozzle PTFE Tube This is the PTFE tube that goes in the nozzle/heat break Includes: PTFE tube (1 pcs) Length: 43mm Fits: Guider 2 (standard temp)

  Flashforge Hotend/Nozzle PTFE Tube This the PTFE tube that goes inside the heatsink.  Includes: PTFE tube for hotend (1 pcs) Length: 26.75mm Fits: Guider 2S HTRobo E3 Pro

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Pulley Bracket Front Kit Holds Y axis rod in place Includes:Bracket (2 pcs)Idler Pulley Assembly (2 pcs) Location:Left...

  Flashforge Bracket and Idler Pulley Set These brackets hold the outer linear rods and pulleys in place. Pulleys are included as shown in the pictures.  Includes: Front Right side bracket/pulley assembly (1 pcs)Front Left side...

  Flashforge Idler Pulley Assembly - X Axis Includes: Pulley assembly (1 pcs) Location: X Axis Fits:Creator 3Creator 3 Pro

  Flashforge Idler Pulley Assembly Includes: Idler pulley assembly (1 pcs) For: X-Axis Fits: Creator Pro 2Creator Max 2

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Idler Pulley Assembly Includes: Idler pulley assembly (1 pcs) For: X-Axis Fits: Creator Pro 2Creator Max...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. X Axis Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2 pcs) Fits:...

  Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)29mm shaft (1 pcs)10mm Flange Bearing (2 pcs)E-clip (2 pcs) Location: X axis Fits:Guider 2Guider 2S HTRobo E3 Pro Note: This pulley uses 10mm flange bearings and will...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Idler Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2...

   Flashforge Idler Pulley Assembly - Y Axis Includes: Pulley assembly (1 pcs) Location: Y Axis Fits:Creator 3Creator 3 Pro

  Flashforge Idler (Driven) Pulley Assembly Center shaft is about 37mm long Includes: Pulley assembly (1 pcs) Location: Y-Axis Fits:Creator ProCreator Pro 2Creator Max 2

  Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)35mm shaft (1 pcs)Spacer (1 pcs)10mm Flange Bearing (2 pcs)E-clip (2 pcs) Location: Y-Axis Fits:Guider 2Guider 2S HT Note: These pulleys use 10mm flange bearings and only...

  Flashforge Drive Pulley Assembly This is the drive pulley with coupler for the newer style stepper motor/shaft. This style uses a coupler (included) to connect the drive shaft to the pulley assembly. Please Note: This will only work with the...

  Flashforge Y Axis Drive Pulley Assembly This is the drive pulley with coupler for the newer style stepper motor/shaft. This uses a coupler (included) to connect the drive shaft to the pulley assembly. Includes: Pulley Assembly (1...

  Brass Push Fit Connector (latest version) This is the latest version of the push fit connector from Flashforge. It replaces the older silver push fit connector (see picture below).  Includes: Push fit connector (1...

  Push Fit Connector Bracket This is the plastic bracket that the metal Push Fit connecter screws into. Includes: Bracket (1 pcs) Fits: Adventurer 3 Pro 2Adventurer 4Adventurer 4 Pro

  Radial Fan (30x150mm) Includes: Fan (1 pcs) Fits: Creator 4

 Used Item  Removed from low hour 3D printer, May have minor scratches and/or cosmetic imperfections. Creator Pro/Pro 2 Rubber Feet  Includes: Rubber foot (2 pcs)Installation Screws (2 pcs) Fits: Creator ProCreator Pro 2

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

Side Door for Flashforge Adventurer 4 Door for the filament chamber Includes: Door with magnets (1 pcs) Fits: Adventurer 4

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Side Vent Panel Includes: Vent Panel (1 pcs) Color: White Fits:DreamerDreamer NXInventor

  Flashforge Side Vent Panel Includes: Vent Panel (1 pcs) Color: White Fits:DreamerDreamer NXInventor

  Silicone Sock (Heater Block Cover) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

  Silicone Sock (Heater Block Cover) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

  Snap Ring for Teflon Tube  Includes: Snap ring (2 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Robo E3Monoprice Voxel

Flashforge Extruder Fan Spacers These are the spacers that reside between the extruder fan and heatsink on some Flashforge 3D Printers. Includes: Spacer (4 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

  Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Robo E3 Pro   Guider 2S HT (with rectangular opening for spool holder)

   Used Item  Cables are removed from low hour 3D printers. Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Robo E3 Pro   Guider 2S HT (with...

  Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits: DreamerDreamer NXInventor

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits: DreamerDreamer NXInventor

  Flashforge Spool Holder *This is a used product and may show signs of light use. Includes: Spool holder (1 pcs) Color: Red Fits: Finder Finder 2

  Flashforge Spool Holder Includes: Spool holder (1 pcs) Color: Blue Fits: Inventor 2Inventor 2S Note: Does not include filament runout sensor. See circled area in picture.

  Flashforge Bed Leveling Spring Includes: Spring (1 pcs) Fits:DreamerDreamer NXInventorInventor 2FinderFinder 2Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Sold in units of 1 - Three springs are required per printer

  Flashforge Replacement Bed leveling Spring Includes: Spring (1 pcs) Fits:FinderFinder 2 Inventor 2Inventor 2S Note: Sold in units of one - 3 are required per printer

  Flashforge Spring Includes: Spring (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2InventorInventor 2

Stainless Steel Nozzle Includes: Nozzle of selected size (1 pcs) Material: Stainless Steel Fits:Guider 3Guider 3 PlusCreator 3 Pro (does not fit standard Creator 3)Creator 4Robo E4 Pro

  Flashforge Stepper Driver (Black Version) Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits:Creator Pro 2Creator Max 2  WARNING  Do not install these in the location of the green stepper drivers. This will damage the board...

  Flashforge Stepper Driver (Green Version) Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits:Creator Pro 2Creator Max 2  WARNING  Do not install these in the location of the black stepper drivers. This will damage the board and...

  Flashforge Stepper Driver Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits:Guider 2 (All Axis)Guider 2S HT (Z Axis Only)Robo E3 Pro Stepper driver may look different than pictured

  Replacement Stepper Driver Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits: Creator Pro 2 (XA1, XB1 location)Guider 2S HT (X/Y & Extruder Only - NOT for Z Axis)  WARNING Do not install in Z axis location on the Guider...

  Flashforge E Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: Extruder Fits:Creator ProCreator Max

  Flashforge Extruder Stepper Motor Includes: Stepper motor (1 pcs) Fits:InventorDreamerDreamer NXCreator Pro 2Creator Max 2

  Flashforge E Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: Extruder Fits:Finder 3Artemis

  Flashforge Extruder Stepper Motor Includes:  Motor (1 pcs) Location: Extruder Fits: Guider 2Guider 2S (not for Guider 2S HT)Creator 3 (for left or right extruder)

  Flashforge Extruder Stepper Motor Includes: Motor (1 pcs) Location: Extruder Fits: Guider 2S HTRobo E3 Pro

  Stepper Motor for X Axis Includes: X Axis Stepper Motor (1 pcs) Fits: Creator 4

  Flashforge X Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: X axis Fits: Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Stepper Motor - X/Y Axis Includes: Stepper Motor (1 pcs) Location: X or Y axis Fits:Creator ProCreator Pro 2 Creator MaxCreator Max 2 DreamerDreamer NXInventor

  Flashforge Stepper Motor - X/Y Axis Includes: Motor (1 pcs) Location: X or Y axis Fits: Inventor 2Inventor 2S

  Flashforge Stepper Motor (Y) Includes: Stepper motor (1 pcs) Location: Y Axis Fits: Adventurer 4

  Flashforge Y Axis Stepper Motor (V2) Includes: Motor (1 pcs) Fits: Guider 2Guider 2S HTRobo E3 Pro Notes: This Y motor is for the later version of the Guider 2 and 2S HT. The later version uses a coupler to connect the left side...

  Flashforge Z Motor Includes: Motor (1 pcs) Fits: Finder 2

  Flashforge X/Y Motor Includes: Stepper motor (1 pcs) Fits: Guider 3Guider 3 PlusRobo E4 Pro 

  Creator 3 Y Motor (V2) Fits: Creator 3 (2020 or later version)Creator 3 Pro *Note: This Y motor is for the later version Creator 3 which uses a coupler to connect the left side drive pulley assembly to the motor rod. The circled portion...

  Flashforge Z Motor Includes: Z axis motor with leadscrew (1 pcs) Fits: Creator 3

  Flashforge Z Motor Includes: Z axis motor with leadscrew (1 pcs) Fits: Creator 3Creator 3 Pro

  Flashforge Z Axis Stepper Motor Includes:Z axis motor with leadscrew (1 pcs)Leadscrew nut (1 pcs) Fits: Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Z Motor Includes: Z axis motor with leadscrew (1 pcs) Fits: Guider 3 Plus

  Flashforge Z Motor Includes: Z axis motor with leadscrew (1 pcs)Leadscrew Nut (1 pcs) Fits: Guider 3, Robo E4 Pro

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Z Motor with Leadscrew (No Nut) Fitment Note: Some older Creator Pro printers use the Dreamer Z motor/lead...

  Flashforge Z Motor with Leadscrew & Nut Fitment Note: Some older Creator Pro printers use the Dreamer Z motor/lead screw, which is a little bit shorter. Please check that your current leadscrew matches the picture...

  Flashforge Z Motor Includes:Z Motor with lead screw (1 pcs)Lead screw nut (1 pcs) Fits:DreamerDreamer NXInventorInventor 2Inventor 2S

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Dreamer Z Motor Includes:Z Motor with lead screw (1 pcs) Fits:DreamerDreamer NXInventor

   Flashforge Extruder Stepper Motor Cable - Left Includes: Cable (1 pcs) Length: 1.2 Meter Fits:Creator Pro 2 (left extruder)Creator Max 2 (left extruder)

    Used Item  Removed from a low hour 3D printer Flashforge Extruder Motor Cable - Left Includes: Cable (1 pcs) Length: 1.2 Meter Fits:Creator Pro 2 (left extruder)Creator Max 2 (left extruder)

  Flashforge Extruder Motor Cable - Right Runs from extruder motor to mainboard. Includes: Cable (1 pcs) Length: 1.2 Meter Fits: Creator Pro 2 (right motor)Creator Max 2 (right motor)

   Used Item  Cables are removed from low hour 3D printers. Flashforge Extruder Motor Cable - Right Runs from extruder motor to mainboard. Includes: Cable (1 pcs) Length: 1.2 Meter Fits: Creator Pro 2 (right...

  Flashforge X Motor Cable (Left Side) This cable runs from the mainboard to the X axis stepper motor which moves the left side print head. Includes: Cable (1 pcs) Length: 1060mm  Fits: Creator Pro 2Creator Max 2

  Flashforge X Motor Cable (Right Side) This cable runs from the mainboard to the X axis stepper motor which moves the right side print head assembly. Includes: Cable (1 pcs) Length: 880mm Fits: Creator Pro 2Creator Max 2

  Flashforge Stepper Motor (X/Y/Z) Includes: Stepper motor (1 pcs) Location: X/Y/Z Axis* Fits: Finder *(X/Y Axis Only)Finder 2 *(X/Y Axis Only)Adventurer 3 (X/Y/Z)Adventurer 3 Pro (X/Y/Z)Adventurer 3 Pro 2 (X/Y/Z)Adventurer...

  Flashforge Extruder Stepper Motor Includes: Stepper motor (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

  Flashforge X Axis Stepper Motor Includes:Stepper motor (1 pcs)Pulley (1 pcs) Fits: Creator 3Creator 3 Pro

  Flashforge X Axis Stepper Motor Includes:Stepper motor (1 pcs)Drive pulley (1 pcs) Fits: Guider 2S HTRobo E3 Pro

  Stepper Motor for Z Axis Includes: Z Axis Stepper Motor (1 pcs)Pulley (1 pcs) Fits: Creator 4

  Hotend Support Pins These pins go between the heater block and heatsink. Includes: Pin (6 pcs) Fits:Creator 3 ProGuider 3Guider 3 PlusRobo E4 Pro Note: Hotend in picture is not included

  Hotend Support Pins These pins go between the heater block and heatsink on the V1 extruder.  Includes: Pin (6 pcs) Fits: Creator 4

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...