Flashforge

  Flashforge V2 Heat Break (Threaded Pipe) *Note: This heat break is only compatible with the new version hotend. Please check the picture and make sure it matches the part you are replacing. It will not work with the older (V1) version...

  Heated Build Plate Assembly Comes fully assembled with print surface installed. Includes:Build plate platform (1 pcs)Build plate heater (1 pcs)Print surface (1 pcs) Fits: Creator Pro 2Creator Max 2Creator ProCreator MaxDreamerDreamer...

  Flashforge Heater Block  This heater block is for the latest version thermistor from Flashforge.  Includes:Heater block (1 pcs)Screw for holding thermistor (1pcs)Set screw for holding heater (1 pcs) Fits: Finder 2 (with bead...

  Heater Block for Left Side Hotend Includes: Heater block (1 pcs) Location: Left Side Fits: Creator 4

  Heater Block for Right Side Hotend Includes: Heater block (1 pcs) Location: Right Side Fits: Creator 4

  Flashforge Heater Block Includes: Heater block (1 pcs) Fits: Creator 3 Pro Note: Does not include set screw. Set screw available separately here.

  Flashforge Heating Block Includes:Heater block (1 pcs)Heater (1 pcs)Thermocouple (1 pcs) Fits: Creator 3

  Flashforge Heater Block Includes: Heater block (1 pcs) Fits: Creator Pro 2Creator Max 2 Note: Clamping screws not included. Click here if you need the clamping screws.

  Flashforge Heater Block Includes: Heater block (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor Note: Set screw not included. Order set screw here.

  Flashforge Heater Block  Includes: Heater block (1 pcs) Fits:Guider 2Finder 2Inventor 2 NOTE: Does not include set screw for holding heater cartridge. If needed, purchase set screw here.

  Flashforge Heater Block Includes: Heater block (1 pcs)Clamping screw (1 pcs) Fits: Guider 2S HTRobo E3 Pro

  Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro  Note: Does not include the M4x3mm set screw for securing heater cartridge. The set screw may be purchased here. 

Socket Head Cap Screw - Low Head - Stainless Steel  Used to clamp the heater cartridge in the heater block Includes: Socket Head Cap Screw - Low Head (4 pcs) Size: M3x8 Fits:Guider 2S HTCreator Pro 2Creator Max 2Robo E3 Pro

  Flashforge Heat Resistant Insulation Insulation for the heater block on the below listed Flashforge 3D printers. Includes: Insulation (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor (Not for Inventor 2) Note: To attach this...

  Heat Resistant Insulation  Includes: Insulation (1 pcs) Fits: Guider 2S HTRobo E3 Pro Note: To attach this to the heater block you will need 5mm Kapton tape (not included) available here.

  Heater Cartridge & Fan For the left side extruder Include:Fan (1 pcs)Heater cartridge (1 pcs) Fits: Creator Max (Left Side)

  Heater Cartridge & Fan For the right side extruder Include:Fan (1 pcs)Heater cartridge (1 pcs) Fits: Creator Max (Right Side)

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Fits: Creator 4

  Flashforge Hotend Heater Cartridge Includes: Heater cartridge (1 pcs) Fits:Creator Pro 2Creator Max 2

  Flashforge Heater Cartridge  Includes: Heater cartridge (1 pcs) Fits: Creator Pro

  Flashforge Heater Cartridge  Includes: Heater cartridge (1 pcs) Voltage: 24VDC Watts: 40 Fits:DreamerInventor

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Volts: 24Watts: 40 Fits:Finder (24 volt)Finder 2Guider 2Guider 2S HTInventor 2Inventor 2SRobo E3 Pro

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro 

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Specs:12 volt58 watt Fits: Original Finder 12 volt

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Fits: Creator 3 Pro

  Flashforge Heatsink Includes: Heatsink (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro Note: Does not include setscrew for holding heat break or other mounting hardware.

  Flashforge Heatsink - LEFT SIDE Includes: Heatsink (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Does not include set screw. Available here: Setscrew for Flashforge 

  Flashforge Heatsink - RIGHT SIDE Includes:  Heatsink (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Does not include set screw. Available here: Setscrew for Flashforge

Flashforge Heatsink Includes: Heatsink (1 pcs) Fits:FinderFinder 2Inventor 2Inventor 2S

PB Select™ Heatsink Includes: Heatsink (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

  Flashforge Heatsink Includes: Heatsink (1 pcs) Fits: Guider 2 Note: Does not include set screw. If needed, purchase set screw here.

  Flashforge Hotend Heatsink Includes: Heatsink (1 pcs) Fits: Guider 2S HTRobo E3 Pro Note: Does not include set screw.

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

  Hotend Feeding Tube This metal tube installs in the top of the heatsink and guides filament from the extruder to the hotend (see circled part in picture). Includes: Feeding tube (1 pcs) Fits:Creator 3 Pro Note: Hotend in picture is not...

  V2 Hotend Heatsink Includes: Heatsink V2 (1 pcs) Fits: Creator 4 Note: Only fits the V2 hotend. Check the picture and make sure it matches your current heatsink before ordering.  

  Replacement Air Filter Set Includes: Air filter (2 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Flashforge HEPA Filter Includes: HEPA filter (1 pcs) Size: 120x120x15mm Fits: Creator 4

  Hex Wrench (L Wrench) Includes: Hex wrench (1 pcs) Size: 3.0mm

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

  Flashforge High Temp Hotend Assembly Includes:Heatsink (1 pcs)Heat break (1pcs)PTFE tube (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermocouple (1 pcs)Hotend insulation (1 pcs)Nozzle - 0.40mm (1 pcs) Fits: Guider 2S HTRobo E3 Pro

  Flashforge High Temp Hotend Assembly with Hardened Steel Nozzle This version includes a hardened steel nozzle for longer life. Includes:Heatsink (1 pcs)Heat break (1pcs)PTFE tube (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermocouple...

Hotend (Extruder) Screw Kit for Dreamer NX A selection of screws for the extruder assembly. Includes:M3x20 socket head cap screw (2 pcs)Turbo fan to bracket M3x8 socket head cap screw (4 pcs)Turbo fan bracket to extruderExtruder to X carriage M3x8...

  Flashforge Hotend (Nozzle) Assembly Complete hotend assembly including heater, thermistor, nozzle and fan. Includes: Hotend assembly (1 pcs) Nozzle Size: 0.40mm  Fits: Guider 3 Ultra

  Flashforge Hotend (Nozzle) Assembly Complete hotend assembly including heater, thermistor, nozzle and fan. Includes: Hotend assembly (1 pcs) Nozzle Size: 0.60mm  Fits: Guider 3 Ultra

  Flashforge Hotend (Nozzle) Assembly  Complete hotend assembly including heater, thermistor, nozzle and fan. Includes: Hotend assembly (1 pcs) Nozzle Size: 0.80mm  Fits: Guider 3 Ultra

  Flashforge Hotend Assembly Come fully assembled ready to install. Includes:Heat break (1 pcs)Heater block (1 pcs)Thermocouple (1 pcs)Heater cartridge (1 pcs)Nozzle (1 pcs) Fits: Creator Pro 2 (Left side) Creator Max 2...

Flashforge Hotend Assembly - Left Side Includes: Heater (1 pcs)Thermocouple (1 pcs)Heat break with PTFE tube (1pcs)Heater block (1 pcs)Heatsink (1 pcs)0.40mm nozzle  (1 pcs)M3x8 socket head cap screws (2 pcs) Fits: Creator 3 Pro...

  Flashforge Left Side Hotend Assembly Includes: Nozzle assembly (1 pcs)Build plate leveling sensor (1 pcs)Fan (1 pcs)Carriage Bracket (1 pcs) Location: Left side Fits: Creator 3 (2020 and later model) Note: The...

  Flashforge Hotend Assembly (Print Head) Fully assembled.  Includes:0.40mm Nozzle assembly (1pcs)Fan (1 pcs)LED light (1 pcs)Internal PCB boards and wires Fits: Adventurer 3 Pro 2Adventurer 4 Pro

  Flashforge Hotend Assembly (Print Head) Fully assembled.  Includes:0.40mm Nozzle assembly (1pcs)Fan (1 pcs)LED light (1 pcs)Internal PCB boards and wires Fits: Adventurer 4Adventurer 4 Lite

  Flashforge Hotend Assembly Come fully assembled ready to install. Includes:Heat break (1 pcs)Heater block (1 pcs)Thermocouple (1 pcs)Heater cartridge (1 pcs)Nozzle (1 pcs) Fits: Creator Pro 2 (Right side) Creator Max 2...

  Flashforge Hotend Assembly - Right Side Includes: Heater (1 pcs)Thermocouple (1 pcs)Heat break with PTFE tube (1pcs)Heater block (1 pcs)Heatsink (1 pcs)0.40mm nozzle  (1 pcs)M3x8 socket head cap screws (2 pcs) Fits: Creator 3 Pro...

  Flashforge Right Side Hotend Assembly Includes:Nozzle assembly (1 pcs)Build plate leveling sensor (1 pcs)Fan (1 pcs)Carriage Bracket (1 pcs) Location: Right side Fits: Creator 3 (2020 and later model) Note: The build...

  Flashforge Hotend Assembly Standard Temperature  Includes: Hotend assembly (1 pcs) Fits: Guider 2  

  Flashforge Hotend Assembly (Print Head) Fully assembled.  Includes:0.40mm Nozzle assembly (1pcs)Fan (1 pcs)LED light (1 pcs)Internal PCB boards and wires Fits:Adventurer 3Adventurer 3 ProMonoprice VoxelRobo E3

  Flashforge Hotend Assembly Includes: Hotend assembly (1 pcs) Fits:Creator Pro Mounting hardware not included

  Flashforge Hotend Assembly Includes: Assembled hotend (1 pcs) Fits:DreamerInventor

  Hotend Assembly Replacement hotend for the Finder 3. Fully assembled with 0.40mm brass nozzle.  Includes: Hotend Assembly (1 pcs) Fits: Finder 3

  Flashforge Hotend (Nozzle) Assembly  Includes: Hotend assembly (1 pcs) Nozzle Size: 0.40mm  Fits: Guider 3Guider 3 PlusRobo E4 Pro 

  Left Side Hotend Assembly with 0.40mm Hardened Steel Nozzle Includes: Heat break (1 pcs)Heater block (1 pcs)Temperature sensor (1 pcs)Heater (1 pcs)Nozzle -  0.40mm  hardened steel (1...

  Right Side Hotend Assembly with 0.40mm Hardened Steel Nozzle Includes: Heat break (1 pcs)Heater block (1 pcs)Temperature sensor (1 pcs)Heater (1 pcs)Nozzle -  0.40mm  hardened steel (1 pcs) Location: Right...

  Left Side HT Hotend Assembly with 0.40mm Nozzle Includes: Heat break (1 pcs)Heater block (1 pcs)Temperature sensor (1 pcs)Heater (1 pcs)Nozzle -  0.40mm  (1 pcs) Location: Left Side Fits: Creator 4 *Notes: Does...

  Right Side HT Hotend Assembly with 0.40mm Nozzle Includes: Heat break (1 pcs)Heater block (1 pcs)Temperature sensor (1 pcs)Heater (1 pcs)Nozzle -  0.40mm  (1 pcs) Location: Right Side Fits: Creator 4 *Notes: Does...

  Left Side V2 Hotend Assembly with Hardened Steel 0.60mm Nozzle Replacement hotend for the Creator 4 V2 Extruder. Includes: Heatsink (1 pcs)Heat break (1 pcs)Heater block (1 pcs)Heater (1 pcs)Temperature sensor (1 pcs)Nozzle...

  Right Side V2 Hotend Assembly with Hardened Steel 0.60mm Nozzle Replacement hotend for the Creator 4 V2 Extruder. Includes: Heatsink (1 pcs)Heat break (1 pcs)Heater block (1 pcs)Heater (1 pcs)Temperature sensor (1 pcs)Nozzle -  0...

  Left Side High Temperature Hotend Assembly with 0.60mm Nozzle Includes: Heat break (1 pcs)Heater block (1 pcs)Temperature sensor (1 pcs)Heater (1 pcs)Nozzle -  0.60mm  (1 pcs) Location: Left Side Fits: Creator...

  Right Side HT Hotend Assembly with 0.60mm Nozzle Includes: Heat break (1 pcs)Heater block (1 pcs)Temperature sensor (1 pcs)Heater (1 pcs)Nozzle -  0.60mm  (1 pcs) Location: Right Side Fits: Creator 4 *Notes: Does...

  3010 Heatsink Cooling Fan This fan cools the heatsink on the coldside of the nozzle assembly.  Includes: Fan (1 pcs) Size: 30x30x10mm Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Flashforge Hotend (Print Head) Housing Includes:Top housing (1 pcs)Bottom housing (1 pcs)M3 screw (1 pcs) Fits: Adventurer 3Adventurer 3 ProMonoprice VoxelRobo E3 Note: Does not include: Nozzle, fan shroud or any...

Screws for Creator Pro hotend assembly A selection of screws for the hotend assembly. Includes: M3x6 socket head cap screw (4 pcs)Wire support bracket to cold block M3x8 socket head cap screw (3 pcs)Blower fan shroudExtruder to...

Hotend Screw Assortment  A selection of screws for the extruder assembly. Notes: This is a selection and not a complete replacement set.Color of screws may be different than shown. Fits:Creator Pro 2Creator Max 2 Includes:M3x16 socket head cap...

  Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)Shaft (1 pcs)Flange Bearing (2 pcs)E-clip (2 pcs) Location: Y axis Fits:Inventor 2Inventor 2SFinder Finder 2

   Used Item  Removed from low hour 3D printer        Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)Shaft (1 pcs)Flange Bearing (2 pcs)E-clip (2 pcs) Location: Y axis Fits:Inventor...

  4010 Air Filter Fan This fan is used for the internal air filter. Includes: Fan (1 pcs) Size: 40x40x10mm Fits:Adventurer 5MAdventurer 5M ProRobo E4

Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater block. Includes: Tape roll (1 pcs) Width: 5mm Length: 33 meters

  Flashforge Replacement LCD Keyboard Includes:  PCB Keyboard (1 pcs) Fits: Creator Pro Note: Does not include key caps

  Flashforge Replacement LCD Screen  Includes: LCD screen (1 pcs) Fits: Creator Pro

    Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Replacement LCD Screen Assembly Complete LCD screen assembly, including SD card...

  Flashforge Replacement LCD Screen Assembly Complete LCD screen assembly, including SD card reader. Includes: LCD assembly (1 pcs) Fits: Creator Pro

Leadscrew Bushing This small plastic bushing is located at the bottom of the Z axis leadscrew. Includes: Bushing (1 pcs) Fits:Adventurer 3Adventurer 3 ProRobo E3Monoprice Voxel

  Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Adventurer 4

  Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Adventurer 5MAdventurer 5M Pro

   Used Item  This item is fully functional, but may show signs of use, such as scuffs and scratches. Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Creator ProDreamerInventorFinder

  LED Board - Light Strip for Flashforge 3D Printers Includes: LED light strip (1 pcs) Fits:Creator Pro 2Creator Max 2

  LED Board - Light Strip for Flashforge 3D Printers Includes: LED light strip (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor 

  Flashforge LED Board - Light Strip Includes: LED light board (1 pcs) Fits:Guider 2Guider 2S HTCreator 3Robo E3 Pro

  Flashforge LED Board - Light Strip Includes: LED light board (1 pcs) Fits:Guider 3Guider 3 PlusGuider 3 UltraRobo E4 Pro Creator 4

  Flashforge LED Board Fits in the print head and lights the object being printed. Includes: LED Board (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versionsFinder 2Monoprice VoxelRobo E3

  Note: This part was removed from a brand new Inventor 2S. LED Light Kit Includes: LED light board (1 pcs)Light cover (1 pcs)Mounting screws (4 pcs) Fits:Inventor 2Inventor 2S

  Flashforge X Axis Limit Switch For left extruder only Includes: Limit switch (1 pcs) Fits:Creator Pro 2Creator Max 2 Creator Pro 2 Right Extruder Limit Switch available here

  Flashforge X Axis Limit Switch For right extruder only Includes: Limit switch (1 pcs) Fits:Creator Pro 2Creator Max 2 Creator Pro 2 Left Extruder Limit Switch available here

  Flashforge Limit Switch Includes: Limit Switch (1 pcs) Location: X, Y or Z axis Fits:Finder 3Guider 2Guider 2S HTInventorRobo E3 Pro Fitment Note: Fits different locations on different printers. Make sure the switch in the picture...

  Flashforge Build Plate Limit Switch (Y Axis Sensor) For the Y Axis Includes: Limit switch (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3 Scroll down for Adventurer 4 instruction video 

  Flashforge Limit Switch (Endstop) Includes: Limit switch (1 pcs) Location: Y Axis Fits: Finder 3

  Flashforge Z Limit Switch This is the limit switch (endstop) for the Z axis. It is sometimes called the Z axis sensor switch. Includes: Limit switch (1 pcs) Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Monoprice VoxelRobo E3

  Flashforge Sensor Switch This is the limit switch for the Z (bed) Axis. Includes: Limit switch (1 pcs) Fits:Inventor 2Inventor 2S

  Flashforge Z Axis Limit Switch Includes: Limit switch (1 pcs) Fits: Adventurer 4 Scroll down for instruction video

  Flashforge Limit Switch Includes: Limit Switch (1 pcs)  Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Finder 3Inventor 2Inventor 2S Fitment Note: Fits different locations on different printers. Make sure the switch...

  Flashforge Limit Switch (Endstop) Includes: Limit switch (1 pcs) Location: Y/Z axis Fits:Inventor 2DreamerDreamer NX Fitment Note: Fits different locations on different printers. Make sure the switch in the picture matches...