Flashforge

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

  Flashforge Finder 2 Bead Thermistor This is the latest (and only) version available from Flashforge. Includes: Thermistor (1 pcs) Fits: Finder 2 (with new heater block)  IMPORTANT  Please read...

  Flashforge Finder 2 Thermistor Includes: Thermistor (1 pcs) Fits: Finder 2 (with threaded heater block)  IMPORTANT  Please read everything below before ordering. This thermistor does not fit the Finder, it...

  Flashforge Thermocouple  Includes: Thermocouple (1 pcs) Fits:Creator 3Creator 3 ProCreator 4

  Flashforge Thermocouple  Includes: Thermocouple (1 pcs) Fits:Creator Pro 2Creator Max 2

  Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits: Creator Pro

  Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits:DreamerInventor

  Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits:Inventor 2Guider 2Guider 2S HTRobo E3 ProFinder*  *IMPORTANT  If ordering for the Finder, please read everything below before ordering.Make sure the picture above...

  Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits: Creator Max

Gates GT2 6MM Belt Sold in lengths of 1 meter Belt width: 6mm The length of the belt you receive will be the quantity you order x1 meter. So, if you order a quantity of 4 you will receive one 4 meter belt.

  Top Cover This is the large clear acrylic cover that goes on the top of the printer. Includes: Top cover (1 pcs) Fits:Creator Pro (2016 or later version)Creator Pro 2Creator MaxCreator Max 2

   *Used Item  Removed from used Creator Pro printers, top covers may be scuffed and show signs of wear, but have no cracks and are in good working condition. Top Cover This is the large clear acrylic cover that goes on the top of...

   Used Item  This item may show signs of use, such as scuffs and scratches. Top Cover This is the plastic cover that goes on top of the printer. Includes: Top cover (1 pcs) Fits:Inventor 2Inventor 2S

  Top Cover This is the large plastic cover that goes on the top of the printer. Includes: Top cover (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Top Door (Lid) This is the clear plastic lid that encloses the top of the printer. Includes: Top door (1 pcs) Fits: Adventurer 5M ProRobo E4

  Please read our returns policy regarding electronic items Flashforge Touch Screen and Mainboard Includes: Touch Screen (1 pcs)Mainboard (1 pcs) Fits: Guider 3 Note: Does not include driver board.

  Flashforge TFT Touch Screen Includes: Touch Screen (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3D Scroll down for instruction video

  Flashforge TFT Touch Screen Includes: Touch Screen (1 pcs) Fits: Adventurer 4 Scroll down for instruction video

  Flashforge TFT Touch Screen Includes: Touch Screen (1 pcs) Fits: Adventurer 5M ProRobo E4 Note: Watch the video below for a quick demonstration of how to connect and disconnect the ribbon cable.

  Flashforge TFT Touch Screen Includes: Touch Screen (1 pcs) Fits: Adventurer 5M Note: Watch the video below for a quick demonstration of how to connect and disconnect the ribbon cable.

 Used Item  Removed from low hour 3D printer Flashforge Touch Screen Includes: Touch Screen (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Does not come with the metal frame around the screen. If your current screen has the...

Flashforge Touch Screen Includes: Touch Screen (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Does not come with the metal frame around the screen. If your current screen has the metal shroud, remove it by straightening the tabs on the back...

 Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Touch Screen Includes: Touch Screen (1 pcs) Fits:DreamerDreamer NXNote: Does not come with the metal frame...

   Please read our returns policy regarding electronic items Flashforge Touch Screen Includes: Touch screen (1 pcs) Fits: Finder 2Inventor 2Inventor 2S  

  Flashforge TFT Touch Screen Includes: TFT Screen (1 pcs) Fits: Creator 3 Pro

  Flashforge TFT Touch Screen Includes: TFT Screen (1 pcs) Fits: Creator 3

  Flashforge Touch Screen Includes: Touch Screen (1 pcs) Fits: Guider 2Guider 2S HTRobo E3 Pro  

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)

  Flashforge USB and Ethernet Connection Board Includes: USB/ethernet board (1 pcs)   Fits:Guider 2Guider 2SRobo E3 Pro

  Flashforge USB Interface PCB Board (USB Port) Includes: USB board (1 pcs)   Fits: Adventurer 4Guider 3 Plus

  Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...

  VOC Sensor Assembly Includes: Sensor (1 pcs) Fits: Adventurer 5M ProRobo E4

  Flashforge WiFi Antenna Includes: Antenna (1 pcs) Fits:Adventurer 3Adventurer 3 Pro Monoprice VoxelRobo E3

  Flashforge WiFi Antenna Includes: Antenna (1 pcs) Fits:Adventurer 3Adventurer 4Monoprice VoxelRobo E3

  Flashforge WIFI Board Includes: WIFI board (1 pcs) Fits:Creator MaxInventorDreamerDreamer NX

  Flashforge Wrench  For the heat break on some Flashforge 3D printers Includes: Wrench (1 pcs) Size: 6mm Fits:InventorDreamerDreamer NXCreator ProCreator Max Note This is not a nozzle wrench. Nozzle wrench available here. 

  Flashforge Timing Belt - X Axis Includes: Belt (1 pcs) Location: X Axis Fits: Creator 3 Note: Item may differ from picture

Bushing Set for X Axis These are the small brass bushings the X axis carriage slides on.  Includes: 6mm bushing (1 pcs)8mm bushing (2 pcs) Fits:Adventurer 3 (all models)Adventurer 4 (all models)Robo E3Monoprice Voxel

  Flashforge X Axis Linear Rod These are the rods the print head slides back and forth on.  Includes: Linear rod (2 pcs) Location: X axis Fits:Adventurer 3 LiteAdventurer 3Adventurer 3 Pro

  Flashforge Timing Belt Belt for X Axis Includes: Belt (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3 Note: Item may differ from picture

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

  Flashforge Timing Belt - Y Axis Includes: Belt (1 pcs) Location: Y Axis Fits: Creator 3 Note: Item may differ from picture

  Y Axis Carriage Bracket - LEFT SIDE ONLY Includes: Left side bracket (1 pcs) Fits:Creator Max 2Creator Pro 2 Note: This is the left side bracket only and does not include the linear bearings, motor or pulley.

  Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings. The idler pulley and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator ProInventorInventor...

  Y Axis Carriage Bracket - RIGHT SIDE ONLY Includes: Right side Bracket (1 pcs) Fits:Creator Max 2Creator Pro 2 Note: This is the right side bracket only and does not include the linear bearings, motor or pulley.

Y Axis Carriage Bracket - RIGHT SIDE (Motor Side) This is the bracket that snaps onto the Y axis linear bearings. The motor, limit switch and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator...

  Flashforge Y Carriage Bracket (plastic bracket only - hardware not included) This is the plastic bracket the bed attaches to. It slides back and forth on the Y rod. This part is sometimes called the Y Axis shuttle Includes: Top bracket (1...

   Used Item  Removed from low hour 3D printer. May have reside from glued belts. Y Axis Carriage Bracket Set Includes: Left side bracket (1 pcs)Right side Bracket (1 pcs)Linear bearings LM8SUU (4 pcs)Limit switch mount...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings...

  Flashforge Timing Belt Belt for Y Axis Includes: Belt (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3 Note: Item may differ from picture

 Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Y Axis Carriage Bracket - RIGHT SIDE (Motor Side) This is the bracket that snaps onto the Y axis linear bearings...

   Used Item  Removed from low hour 3D printer.  Flashforge Y Limit Switch Cable (Endstop Cable) Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2

   Used Item  Removed from low hour 3D printer Pulley and Bracket Assembly Includes: Brackets (2 Pcs)Pullies (2 Pcs)Linear rod (1 Pcs) Location:Left RearRight Rear Fits:Creator ProCreator pro 2

   Used Item  Removed from low hour 3D printer Y Pulley and Bracket Assembly Includes: Brackets (2 Pcs)Pullies (2 Pcs)Linear rod (1 Pcs) Location:Left RearRight Rear Fits:DreamerDreamer NX  

  Linear Rod and Pulley Bracket Holds Y axis rod and pulley in place. Includes: Bracket (1 pcs) Location: Right rear corner only Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Does not fit left front/rear or right...

  Linear Rod and Pulley Bracket Holds Y axis rod in place Includes: Bracket (1 pcs) Location:Left RearLeft FrontRight Front Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Does not fit right rear corner. If you need...

  Flashforge Z Axis Leadscrew Includes: leadscrew (1 pcs) Fits: Adventurer 5MAdventurer 5M Pro Note: Does not include leadscrew nut

  Flashforge Leadscrew Set Includes: Left leadscrew (1 pcs)Right leadscrew (1 pcs) Fits: Adventurer 4 Note: Does not include leadscrew nut

  Flashforge Timing Belt Belt for Z Axis. Length: 672mm Includes: Belt (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3 Note: Item may differ from picture

  Flashforge Z Belt Tensioner - Idler Pulley Tensioner bracket for Z-axis belt. Includes: Frame (1 pcs) Idler (1 pcs)Axial (1 pcs)Screws (2 pcs) Fits: Adventurer 3 (all versions)Monoprice VoxelRobo E3

   Like New  - Removed from new or lightly used printers.  Z Bracket Set These brackets are located at the top and bottom of the z axis and hold the linear rods and leadscrew in place.  Includes: Top bracket (1...

   Used Item  Removed from low hour 3D printer.  Flashforge Z Limit Switch (Endstop) Cable Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2

   Used Item  Removed from low hour 3D printer.  Flashforge Z Limit Switch (Endstop) Cable Includes: Cable (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor