X1 Series

  FlowTech™ - CM2 CHT High Flow Nozzles Microswiss and Bondtech have partnered to bring the High Flow, Hardened tip CM2™ nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically...

Microswiss CM2™ Wear Resistant Nozzle for FlowTech™ Hotend The Microswiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an...

Complete Hotend Assembly for X1 and X1C Includes: Hotend (1 pcs)Heater (1 pcs)Thermistor (1 pcs)Retaining clip (1 pcs)Thermal grease (1 sachet)Silicone sock (1 pcs)M3*14 screws (2 pcs) Max Printing Temp: 320 ℃ Fits: Bambu...

Hotend Cooling Fan for X1 and X1C The Hotend Cooling Fan is used to cool and reduce the temperature of the ceramic heater. The cooling fan has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit...

  Bambu Lab Display Connector Flex Cable for X1 Series Printers the display connecter flex cable is used to connect the motherboard and high-resolution screen. Its function is to transmit SD card data and display images between the screen and...

Bambu Lab Display Rear Housing with Hinge for X1 Series Printers The display rear housing with hinge for X1 Series is a robust component that securely attaches the display to the main body of the printer, allowing smooth opening and closing while...

E3D DiamondBack Complete HotEnd for Bambu Lab X1-Carbon Available in 0.40, 0.60 or 0.80mm. These premium HotEnds are an official collaboration between E3D, DiamondBack, and Bambu Lab - bringing you the most extreme HotEnd solution to date. E3D is the...

E3D DiamondBack Complete HotEnd for Bambu Lab X1E Available in 0.40, 0.60 or 0.80mm. These premium HotEnds are an official collaboration between E3D, DiamondBack, and Bambu Lab - bringing you the most extreme HotEnd solution to date. E3D is the only...

High Flow HTA (High Temp Abrasive Resistant) for X1E E3D & Bambu Lab High Flow HTA hotends are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant hotends to date...

High Flow ObXidian™ Hotend for Bambu Lab X1/P1 Series E3D & Bambu Lab ObXidian High Flow Hotends are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant...

Fully Assembled High Flow ObXidian™ Hotend for Bambu Lab X1 and X1C Series E3D & Bambu Lab ObXidian High Flow hotends are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more...

Extruder Filament Sensor for X1 Series This sensor is used in the Extruder to detect the presence of the filament, and also detect the Filament Cutter lever. Includes:Extruder Filament Sensor (1 pcs)Screw BT2*5 (2 pcs)Glue (1 pcs) Fits: Bambu...

Extruder Interface Board V9 - X1C Extruder Interface Board V9 is the part of the tool head board where the print head wires are connected. It's also connected to the main TH board V9 and it's only compatible with V9 version of the TH board...

Extruder Motor The extruder motor is installed on the toolhead and used to drive the movement of the extruder. It is a 36-series circular stepping motor. Includes: Extruder Motor (1 pcs)Glue (1 pcs) Fits: Bambu Lab P1 SeriesBambu lab X1...

  Bambu Lab Filament Buffer for X1 and P1 Series Printers The Filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with...

Filament Cutter - 3 Pack Replacement filament cutter. The filament can be cut to prevent the system from clogging. When used with AMS, it assists with multi-material switching. Includes: Filament Cutter (3 pcs) Fits: Bambu...

Bambu Lab Filament Cutter Lever for the X1 Series and P1 Series Printers The filament cutter lever is used for holding the cutter and pushing it to cut filaments. Includes: Filament Cutter Lever (1 pcs)Screw (1 pcs)Shaft...

  DiamondBack FlowTech™ Nozzles The collaboration between Microswiss and DiamondBack introduces the most advanced nozzle to the FlowTech ecosystem. This nozzle features a proprietary Polycrystalline Diamond (PCD) insert, developed after 40...

FlowTech™ Replacement Heater Core This is a spare Heater Core for Microswiss FlowTech™ Hotend model: M3109X. Includes: Heater core (1 pcs) Voltage: 24v Fits:Bambu Lab X1 (with Flowtech Hotend)Bambu Lab X1C (with Flowtech Hotend)

FlowTech™ Heatsink for Bambu Lab X1 and P1 This is a Microswiss FlowTech™ Heatsink for Bambu Lab X1 and P1 Printers. It is compatible only with Microswiss FlowTech hotend models M3109X and M3109P. Includes:Aluminum Heatsink (1...