X1 Series

FlowTech™ Hotend for Bambu Lab X1 This hotend kit comes with a 0.40mm nozzle, plug-and-play heater core/thermistor and is fully compatible with the Bambu Lab X1/X1C 3D Printers. Stock z-height, build volume and firmware remains unchanged...

Silicone Socks for Bambu Lab printers A pack of 3 high temperature non-stick silicone socks for FlowTech™ hotend model: M3109. Includes: Silicone sock (3 pcs) Color: Black Fits:Bambu Lab X1 (with Flowtech Hotend)Bambu...

Front Housing Assembly with Fan for Bambu Lab X1 Series Printers The Front Housing Assembly is mainly used to cool the printed part. Includes: Front housing assembly (1 pcs)Print cooling fan (1 pcs)Connection board (1...

Hardened Steel Extruder Gear Assembly The hardened steel extruder gear assembly is an internal component of the hardened steel extruder unit. It comprises a driven gear and an active gear that work together to feed filament into the hotend. Built...

Hardened Steel Extruder Unit Extruder unit equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit to handle tough...

Heatbed Piezo Interface Board for Bambu Lab X1 and P1 Series Printers  A small circuit board installed underneath the heatbed, which connects the heatbed sensors to the MC board. Includes: Heatbed piezo interface board (1 pcs)ST2-3...

Heatbed Sensor Interface Board for Bambu Lab X1 and P1 Series Printers This interface board is installed in the rear part of the heatbed with 5 connectors. Includes: Heatbed sensor board (1 pcs)Glue (1 pcs) Fits: Bambu...

Bambu Lab Heatbed Sensor Unit for X1 and P1 Series Printers  The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors...

  Bambu Lab Heatbed Signal Cable for X1 and P1 Series Printers The heatbed signal cable is a 6pin cable connected to the hotbed sensor for temperature measurement and leveling. Includes: Cable (1 pcs)Glue (1 pcs) Fits:Bambu Lab P1...

Bambu Lab Heatbed Unit V3 for X1 Series Printers The heatbed in the X1 series printer is a platform installed inside the printer chamber. It can move up and down along the Z-axis and can be heated based on the temperature set by the user...

Bambu Lab High Resolution Screen for X1 Series Printers The high-resolution screen is a 5-inch 1280*720 touch screen, that you can use to control the printer. Includes: High resolution screen (1 pcs) Fits: Bambu Lab X1...

Hotend Thermistor for Bambu Labs X1 and X1C The thermistor has highly accurate temperature measurement and reliable structural design. It is for use with Bambu Lab complete hotend assembly only. Includes: Thermistor (1 pcs)Thermal...

XY Pulley for Bambu Lab X1 Series and P1 Series Printers The XY tensioner idler is an idler mounted on the XY belt tensioner, one on each side (XY), each containing two washers, and an idler. Includes: Idler pulley (1 pcs)Graphite nylon...

  Liquid Glue for Build Plate (Print Bed Adhesive) Includes: 60mL print bed glue (1 bottle) Works with: ABS, PLA, PETG, ASA, PET, TPU Material Safety Data Sheets Instructions Apply pressure to the applicator head to open...

Bambu Lab Lubricant Grease Lubricant Grease is used to lubricate lead screws, or to eliminate noise issues between belts and idle pulleys.  Includes: - Lubricant Grease (6 pcs) Learn more about the Lubricant Grease...

Bambu Lab Lubricant Oil Lubricant Oil is typically used for the lubrication of linear guides, slide rails, and steel shafts. Theoretically, Lubricant Oil can also be used for lead screw lubrication, but since Lubricant Oil is prone to...

Machine Controller Board for Bambu Lab X1 Series Printers The machine control board is the control center for the XYZ-axis motors, the cooling fans, the heat bed, and the AMS. Includes: MC board (1 pcs) Fits: Bambu Lab X1...

Bambu Micro Lidar (Dual Red Laser) for X1 Series The Bambu Micro Lidar is a sensor capable of measuring depth in micrometers. Using this unit, the system can measure the distance, calibrate the flow extruded from the nozzle, and scan the first layer...

Bambu Lab Micro Lidar Cover for X1 Series Printers The Bambu Micro Lidar shell consists of three segments, a top cover, a bottom cover, and a protective lens (protective lens not included). Includes: Micro Lidar Top Cover (1 pcs)Micro Lidar...

Bambu Lab Motor Drive Pulley for X1 and P1 Series Printers The motor drive pulley is installed on a motor to drive the belt. Includes: Drive pulley (1 pcs) Fits: Bambu Lab P1 SeriesBambu Lab X1 Series Instillation: Learn...