X1 Series

Bambu Micro Lidar (Dual Red Laser) for X1 Series The Bambu Micro Lidar is a sensor capable of measuring depth in micrometers. Using this unit, the system can measure the distance, calibrate the flow extruded from the nozzle, and scan the first layer...

Bambu Lab Micro Lidar Cover for X1 Series Printers The Bambu Micro Lidar shell consists of three segments, a top cover, a bottom cover, and a protective lens (protective lens not included). Includes: Micro Lidar Top Cover (1 pcs)Micro Lidar...

Bambu Lab Motor Drive Pulley for X1 and P1 Series Printers The motor drive pulley is installed on a motor to drive the belt. Includes: Drive pulley (1 pcs) Fits: Bambu Lab P1 SeriesBambu Lab X1 Series Instillation: Learn...

Nozzle Wiper - 3 Pack The Nozzle Wiper is used to clean up the waste overflowing from the nozzle of the printer. It consists of PP elastic structure, PTFE tube, and a lock screw. Includes: Nozzle wiper (3 pcs)Mounting screw (3...

  Bambu Lab 4-in-1 Printer Cable Pack  The pack comes with 4 cables including the communication cable connecting the AC board and MC cable, the MC board power supply cable, the heat bed power cable for V3 heatbed, and the cable...

Bambu Lab PTFE Tube (Translucent Gray) Includes: 4 meter PTFE tube (1 pcs) We recommend this cutter to cut the PTFE tube. The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its...

Bambu Lab PTFE Tube Coupler for X1 Series and P1 Series Printers The PTFE Tube Coupler is a component used to connect the PTFE tube, which is mounted on the back of the printer and used to connect the PTFE tube between the buffer and the tool...

Bambu Lab PTFE Tubes for X1 Series and P1S The tube’s inner diameter is 2.5mm, and its outer diameter is 4mm. Includes: PTFE tube - 370mm (1pcs)PTFE tube - 550mm (2 pcs) Fits:Bambu Lab X1 SeriesBambu Lab P1S Note: PTFE tubes are...

Bambu Lab Purge Chute for X1 and P1 Series Printers An assembly that installed on the back of the printer and it is used to clean the nozzle and slide the excess filament out of the printer. Includes: Purge Chute (1...

Screws Kit - X1 Series/P1 Series and AMS This kit offers the screws most commonly used based on user feedback. Includes: Item Number Item Name QTY Location 1 ST3-4.5 10 Rear Panel and the Front Cover...

Silicone Sock for Hotend - 3 Pack The Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance (rated to 300°C printing temperatures). Ensuring optimal thermal insulation and tear resistance, the...

Spool Holder for Bambu Lab X1 and P1 Series Printers Spool holder is installed on the back of the printer and affixed with 2 screws. Includes: Spool holder (1 pcs)Mounting screws (2 pcs) Fits: Bambu Lab P1 SeriesBambu Lab X1...

TH Board Set v9 (Dual Red Laser) for Bambu Lab X1 and X1C The Single Red Laser TH board is discontinued and has been replaced by the Dual Red Laser TH board. The Dual Red Laser TH board works with the Dual Red Laser LIDAR. Includes: Extruder...

  Bambu Lab Toolhead Board FPC Cable for the X1 and X1C Model Printers the Toolhead Board Flexible Printed Circuit Cable (V9) connects the toolhead main board and the interface board. Includes: V9 FPC cable (1...

Bambu Lab WiFi Antenna for X1 Series Printers WiFi antenna enhances the strength and stability of wireless signals, so that devices can better receive and connect to the network. Includes: - WiFi antenna (1pcs) Fits: Bambu Lab X1...

Bambu Lab X-Axis Carbon Rods Assembly for X1 and P1 Series Printers The X-axis carbon rods carry the toolhead left and right. Fits: Bambu Lab P1 SeriesBambu Lab X1 Series Learn more about replacing the X-axis carbon rods...

Bambu Lab XY Belt for X1 and P1 Series Printers The XY belt is an open drive belt with a pitch length of 1442mm. Its main function is to transmit the motion of the motor to the tool head with high precision. Includes: Belt - 1442mm (1...

Bambu Lab XY Belt Tensioner with Pulley for the X1 and P1 Series Printers The XY belt tensioner with pulley is composed of an idler pulley and a bracket, which can change the belt travel distance under the tension of the spring...

Bambu Lab Motor (XY) for the X1 and P1 Series Printers The X or Y motors are installed on the back of the printer to drive the toolhead to move in the XY direction. A motor cable and a driving wheel are included. Includes: Motor (1...

Bambu Lab Z Belt for X1 and P1 Series Printers The Z belt is a close drive belt with a pitch length of 1142mm, it is installed at the bottom of the Bambu Lab X1/X1C printer. Its main function is to transmit the motion of the Z motor to the three...